Screws
|
Diameter x length |
|
|
M1.2x6, groove, countersunk |
Item Nr. M1.2x6 |
|
M1.2x8, groove, countersunk |
Item Nr. M1.2x8 |
|
M1.6x6, groove |
Item Nr. M1.6x6 |
|
M2x3, groove |
Item Nr. M2x3 |
|
M2x5, groove |
Item Nr. M2x5 |
|
M2x8, groove |
Item Nr. M2x8 |
|
M2x10, groove |
Item Nr. M2x10 |
|
M2x4, groove, countersunk |
Item Nr. M2x4 |
Distance sleeves, washers, nuts
|
Description |
|
|
Six sided distance sleeve M2x5 |
Item Nr. DIST M2x5 |
|
Six sided distance sleeve M2x8 |
Item Nr. DIST M2x8 |
|
Six sided distance sleeve M2x10 |
Item Nr. DIST M2x10 |
|
Washer ø2.2x5x0.3 |
Item Nr. BR ø2.2x5x0.3 |
|
Washer ø2.2x4.3x0.5 |
Item Nr. BR ø2.2x4.3x0.5 |
|
Nut M2 |
Item Nr. M2 |
|
Nut M1.2 |
Item Nr. M1.2 |
Miniature contacts
Miniature contacts give reliable current collection and are simple to install and connect. Delivered in packs of 4 contacts. Length = 7 mm.
Item Nr. HK1
Instructions for use: The delrin bushing is pressed into a hole with 2.5 mm diameter, which has been drilled in the locomotive frame. The contact strip is pushed through and the electrical connection soldered on the inside. The strip is then bent to the right angle and spring force to pick up electrical current reliably from the inside of the wheel rim. To avoid melting and damaging the delrin bushing, please be careful with the heat when soldering.